Home > News > Product News >

In the process of digital printing, there are streaks, breaking ink, breaking reasons and solutions.

In the process of digital printing, there are streaks, breaking ink, breaking reasons and solutions.
Issue Time:2018-04-27

When printing a digital printer, there will always be some glitches.It's like a computer, a printer, a common digital product, and if something goes wrong, we need to fix it.Although all vendors will be equipped with special technical advisers, some problems can be solved by themselves.

We need to have a certain understanding of their internal structure to perform simple repairs.

The most common problem is appear in print design, the big head may be ink appear fracture cause, if there is a lot of nozzle clogging, stripe will become more serious.

So how do you resolve the common problems of striping, breaking ink and breaking?

In the process of digital printing, there are streaks, breaking ink, breaking reasons and solutions.


1. Clean the ink head and clean the sprinkler head.

If impurities in the sprinkler pipe are not perfect, cleaning the pipe and cleaning the nozzle are one of the ways to solve the problem.


2. Excessive temperature and air conditioning.

We all know heat bilges cold everybody understands the reason, the excessive temperature can cause ink condensation, in our workplaces to install air conditioning to control of workshop environment temperature, avoid excessive ink solidification temperature nozzle blockage.


3. Deep and shallow stripes, adjustment of sprinkler head.

If we find the patterns of the print out a dark stripes, so the main problem is in the position of nozzle, nozzle position is too low will cause the dark stripes, nozzle position too high will cause the light stripe, adjust the position of the nozzle can effectively solve the problems of deep light color stripe.


4. The ink truck stops and changes the computer.

If there is a pause for a few seconds in the inkjet process, it is likely that the computer is not keeping pace with the printing speed of the digital printing machine.The solution is to replace a computer with a better configuration, with a wide band of bandwidth, and a solid-state drive with fast uploads.


5. Break ink and replace ink.

If the ink is very serious in the printing process of digital printing machine, it is basically caused by ink, and it is the best way to solve the problem when the ink is replaced.


6. The pattern breaks and changes the nozzle.

Appeared in the process of printing, the gradient of fracture, the problem has been the basic on the nozzle, likely is the life of the nozzle has to, if can use after cleaning is the best, if can't use immediately replace the nozzle.


The above is In the process of digital printing, there are streaks, breaking ink, breaking reasons and solutions..editor introduced to everyone .If you want to know more about digital printing towel related content , please pay attention to Jiangsu Busyman Textile Co., Ltd.http://www.towelkingdom.com/